Toll Free: 1.800.277.2439 Tel: 803.739.4360

When every ounce Counts!

View Catalog
  • SURVIVOR 390HE Hostile Environment Digital Weight Indicators (53517)

    NEMA 4X Fiberglas-Reinforced Polyester (FRP) enclosure, Bold 1” Liquid Crystal Display (LCD), Universal mounting tabs (replaceable), Up to 30 updates/second, Selectable display update rate, 5-button operation, environmentally protected mechanical switches, Selectable units, One communication port, full duplex RS-232, RATTLETRAP® vibration control

  • 420 Plus HMI Digital Weight Indicator (85124)

    Large .8” (20.3 mm) Light Emitting Diode (LED) Display, Full numeric keypad, NEMA 4X/IP66 stainless steel washdown enclosure, Power for eight 350 ohm load cells or sixteen 700 ohm load cells, Configurable analog to digital measurement rate, Primary/secondary units configuration: lb, kg, ounces, short tons, metric tons, grams, or none, Two independent communication ports: (2) full duplex, (1) unidirectional active 20 mA current loop, Standardized EDP command sets, Programmable ticket formats up to three 300-character printouts, Full front-panel digital calibration and configuration, Universal mounting stand, Three-stage digital filtering, Consecutive transaction numbering, Two digital inputs, two digital outputs, Time and date (volatile), Count mode

  • SURVIVOR 420HE Hostile Environment Digital Weight Indicators (87959)

    NEMA 4X Fiberglas-Reinforced Polyester (FRP) enclosure, Bright, 2" LED Display, Universal mounting tabs (replaceable), Up to 60 updates/second, Selectable display update rate, lb/kg switching, 5-button operation, Selectable units, One communication port, simplex, selectable RS-232 or 20 mA current loop, RATTLETRAP vibration control

  • IQ plus 590-DC Battery Powered Digital Weight Indicator 52486

    NEMA 4X/IP66–rated stainless steel enclosure, Large 1" (24.5 mm), six–digit Liquid Crystal Display (LCD), 6–button operation, Power for four 350 ohm load cells or eight 700 ohm load cells, Configurable units multiplier, Supports 4– and 6–wire load cell connections, EDP port for full duplex, RS–232 communications, Powered by 6 “C” cell alkaline batteries for complete portability (batteries not included), AC adapter for 115 or 230 VAC power, Configurable standby mode that saves battery life, RATTLETRAP® three–stage digital filtering, Piece count mode

  • IQ plus 710 Digital Weight Indicator (44545, 45527) & 820i Programmable HMI Indicator/Controller (91995)

    NEMA 4X/IP66–rated stainless steel enclosure, Large 1" (24.5 mm), six–digit Liquid Crystal Display (LCD), 6–button operation, Power for four 350 ohm load cells or eight 700 ohm load cells, Configurable units multiplier, Supports 4– and 6–wire load cell connections, EDP port for full duplex, RS–232 communications, Powered by 6 “C” cell alkaline batteries for complete portability (batteries not included), AC adapter for 115 or 230 VAC power, Configurable standby mode that saves battery life, RATTLETRAP® three–stage digital filtering, Piece count mode

  • 720i Programmable HMI Indicator/Controller (101229, 101230)

    LCD display size: panel mount (3.8" x 1.2") universal (5.3" x 1.5"), Four soft keys, Truck in/out, 1000-ID memory, Process control engine - define conditions and actions, Data storage onboard, user-defined, (8) Digital I/O (expandable), One option slot for pluggable options, (20) Auxiliary print formats, Time & date, Audit trail tracking and alibi storage, Peak hold, Rate of change, Multi-range/interval, Local/remote

  • 820i Programmable HMI Indicator/Controller (91995)

    Large (4.6 in W x 2.2 in H, 320 x 156 pixel) LED back-lit LCD display, Weight display from .5 in to .75 in, Display up to two scales (scale 1, scale 2 and total), Five user-defined soft keys, Weight or millivolt calibration with linearization and geographical compensation, NEMA 4X/IP66 stainless steel enclosure, Selectable A-D measurement rate up to 960/second Power for 16, 350 ohm load cells 100 set points, latched or free-running, Multi-range/Internal Peak Hold, Rate of Change, Audit Trail Tracking and Alibi Software, One option slot for pluggable options, 1000 - ID truck register for in/out weighing, User programmable 256K flash memory, Onboard data storage 190K, Downloadable programs, Visual programming for creating custom programs easily, Eight digital I/O

  • 920i Programmable HMI Indicator/Controller 67527

    Large (4.6" W x 3.4" H, 320 x 240 pixel) back-lit LCD graphical display, Selectable character sizes from .25" to 1.2", 60 configurable operator prompts, Display up to four scale channels per screen with required legal-for-trade information, 32 scale accumulators, Five soft keys with 10 user-defined, 14 preset functions per screen, 10 programmable display screens, Millivolt calibration, 5-point linearization and geographical calibration, NEMA 4X/IP66 stainless steel enclosure, Selectable A/D measurement rate up to 960/second, 100 set points, 30 configurable set point types, Two slots for option cards, 1000-ID truck register for in/out weighing, 64K user on-board NV RAM, User programmable 128K flash memory, Reflash memory to upgrade firmware, Power for 16, 350 ohm load cells per A/D board

  • CONDEC UMC600 Digital Weight Indicator (19198)

    Surge protection board, Auto/manual batching modes, 80000 display graduations available, RFI/EMI shielded, Easy digital configuration and calibration, Four control inputs/outputs, Truck in/out weighing mode, 300 truck ID storage, One 10-digit accumulator, 5-point linearization, Keyboard customized serial output, Time and date, Front panel key lockout, Temperature compensated - 18ºF to 104ºF (-10ºC to 40ºC)

  • IQ 700 Digital Weight Indicator (19191)

    Bright Light Emitting Diode (LED) display, AC power, Stainless steel NEMA 4X enclosure, Front-panel digital calibration, Automatic zero and span temperature compensation, Excitation for eight 350 ohm load cells at 10 VDC, Two fully programmable set points with "Zero Band", Two serial ports offering bidirectional RS-232 and simplex RS-232 or 20 mA current loop, Gross/Tare/Net computation, Time and date, Accumulator, 300-truck ID memory, Versatile tilt stand, Set-up parameters printout

  • CW-90 Checkweigher Indicator Only (105970)

    Membrane keypad consisting of ZERO, UNITS, PRINT, TARE, OVER, UNDER, ID, TARGET,0-9, CLEAR, DECIMAL, ENTER, MENU, POWER; 304 stainless steel, IP66 rated, Prevent breather vent, Storage for up to 50 IDs, Unit of Measure: kg, gm, lb, oz, lb/oz, High-Intensity LED display , li>Battery backed time and date, Two full duplex serial ports, Configurable print formats, Audit trail tracking, Optional communications: Ethernet, USB or Fiber Optic, Four configurable Digital I/O, Reflash memory to upgrade firmware, NTEP Certified: Indicator (CC# 08-092), Scale Base (CC# 95-072)

  • CW-90X Checkweigher Indicator Only (105972)

    Piezo keypad consisting of ZERO, UNITS, PRINT, TARE, OVER, UNDER, ID, TARGET, ENTER, MENU, POWER; 304 stainless steel, IP69K rated, Prevent breather vent, Storage for up to 50 IDs, Unit of measure: kg, gm, lb, oz, lb/oz; High-Intensity LED display, Battery-backed time and date, Two full duplex serial ports, Configurable print formats, Audit trail tracking, Optional communications: Ethernet, USB or Fiber Optic, Four configurable Digital I/O, Reflash memory to upgrade firmware, NTEP Certified: Indicator (COC# 08-092),

  • VIRTUi/VIRTUi2 PC-Based HMI for iQUBE/iQUBE2 (85107, 86762, 108435, 108436)

    Web browser-based iQUBE cell status, Configurable display options, Virtual front panel consists of display and five button keypad, Up to eight digital I/O (provided by iQUBE), Primary/secondary units configuration (lb, kg, short tons, metric tons, none), RS-232 communications at up to 57.6 Kbps, Electronic data processing (EDP) port over RS-232 and TCP/IP, Printer port for output-only, simplex communications, Two print formats, Provides for iQUBE configuration, Supports iQUBE diagnostics with configurable error reporting, Peak weight history, Recalibration notification, Provides local and remote reporting of diagnostics and error conditions, NTEP Certified for Classes III and IIIL at 10000 divisions, Concentrated load capacity (CLC), Section capacity

  • 320IS Intrinsically Safe Digital Weight Indicator (86241, 91233, 91234)

    Bright Light Emitting Diode (LED), Stainless steel NEMA 4X/IP66 enclosure, T4 temperature rating, Front-panel digital calibration, Automatic zero and span temperature compensation, Excitation for four 350 OHM or eight 700 OHM load cells, Gross/Tare/Net computation, Tilt stand, Factory Mutual (FM) Entity approved, Duplex fiber optic interface 200 ft. , Power ON/OFF; battery save mode, I/O Module Option: 2 serial ports, 2 analog outputs, 4 digital inputs, 4 relay contact outputs, Factory Mutual (FM) entity approved for Classes I, II, and III, Divisions I and 2, Groups A, B, C, D, E, F, and G

  • IQ 700IS Intrinsically Safe Digital Weight Indicator 32708

    Bright Light Emitting Diode (LED) display, Stainless steel NEMA 4X enclosure, Front-panel digital calibration, Automatic zero and span temperature compensation, Excitation for four 350? load cells at 5 VDC, Bi-directional 20 mA current loop communication port, Gross/Tare/Net computation, Time and date, Tilt stand, Set up parameters printout Measurement Canada Approved

  • 480/480 Plus Legend™ Series Digital Weight Indicators

    • Time and Date, battery backed
    • NEMA 4X/IP66 stainless steel washdown enclosure
    • Password protection for user and configuration changes
    • Operator functions through menu key for Audit Trail, Preset Tare, Unit ID, Accumulator, Time & Date, Set points, Serial Communications, and Print Formats.
    • Two independent serial ports, RS-232 and 20 mA
    • Programmable ticket formats for Gross, Net, Accumulator, and Set points

  • Image
  • 880/880 Plus Performance™ Series Digital Weight Indicators/Controllers

    • USB Device
    • Ethernet TCP/IP
    • Built-in DIN-rail clips on controller box
    • Display and controller can be separated up to 250 ft
    • Hardware slot for one option card
    • Operator functions through Menu key for Audit Trail, Preset Tare, Accumulator, Time & Date and Set points