Toll Free: 1.800.277.2439 Tel: 803.739.4360

When every ounce Counts!

View Catalog
  • UniBridge 7011 Truck Scales

    Standard Features 9" – 12" Profile Ideal where height or access pose any type of installation problem. Available in steel or concrete deck. Single module length up to 30'
    15" Profile Our standard Low Profile ia available in steel or concrete deck, with single module lengths up to 35'
    Surface Mounted No pit required, only 9" to 15" high
    UniBridge Parallel Link Suspension Standard on all models; this system permits simple service of load cells
    UniLatch A UniBridge Exclusive – Standard on all Low Profile truck scales.
    This system reduces installation time and allows bridges to automatically self align & center as they are placed together. Bolts are virtually eliminated from the weigh bridge.
    DL 9000 Load Cells Come with intrinsic lightning and voltage surge protection
    Bump Bolts Eliminates check rods, speeds installation, and permits easier scale adjustment.
    J-Box Mounted in vertical position for easy access, reducing moisture-related problems (rated at NEMA IV)
    Conduit System Designed to protect cable and speed up installation
    Jacking Pad Factory installed for use with hydraulic jacks
    Construction Heavy-duty WF beams braced and tied with extra-heavy steel safety deck
    Examined and Approved Meets or exceeds all requirements set forth in Handbook 44
    Fully Electronic No moving parts
    Steel Deck A UniBridge Exclusive – Uses extra-heavy, high-strength safety plate on all bridge decks
    Safety Side Rail A UniBridge Exclusive – Radius side rails eliminate tire damage and make for a safer operation
    Summing Boards Individual adjustment pots for each position and section on all scales; gaseous diodes are on all boards for added lightning protection
    UniModular Design Modules designed for future expansion
    Surface Preparation All surfaces are thoroughly sandblasted prior to finishing
    Standard Finish Catalyzed UniBridge Epoxy Blue or Epoxy Gray paint
    Bolt Down All anchoring is done after installation permitting perfect placement of scale

  • Hale UniBridge Low Profile Truck Scales

    Standard Features 9"- 18" Profile Ideal where height or access pose any type of installation problems. Available in steel or concrete deck
    UniLatch Latching System A UniBridge exclusive! Reduces installation time as bridges self-align & center.
    Bolts are virtually eliminated!
    UniBridge Parallel Link Suspension Permits simple service of the load cells
    Safety Side Rails Exclusive UniBridge radius side rails alleviate tire damage & promote safer operation
    Surface Mounted No pit required
    Bump Bolts Eliminate check rods, speeds installation, permits easier scale adjustment
    Conduit System Designed to protect cables and speed up installation time
    Examined and Approved Meets or exceeds all requirements set forth in Handbook 44.
    Approved for 50,000 lb x 5 lb 100,000 lb 10 lb 200,000 lb x 20 lb COC# 88-030A2
    Jacking Pad Factory installed for use with hydraulic jacks
    Summing Boards Individual adjustment pots for each position and section on all scales. Gaseous diodes are on all boards for added lightning protection
    UniModular Design Modules are designed for future expansion
    Surface Preparation All surfaces are thoroughly sandblasted prior to finishing
    Standard Finish Catalyzed UniBridge Epoxy Blue or Gray
    Bolt Down All anchoring is done after installation permitting perfect placement of scale
    Cover Plates Easily removed for load cell maintenance
    Fully Electronic No moving parts
    Steel Deck UniBridge exclusively uses extra-heavy, high strength safety plate on all bridge decks
    UniBridge DL9000 Load Cells Complete with intrinsic lightning and voltage surge protection