20 mA current loop data interface Operates on six 1.2 Volt NiCad (standard) or alkaline batteries Battery life: Approximately 1500 charge/discharge cycles Battery duration between charges: Approximately 8 hours of continuous use before the scale shuts itself off. (These numbers are lowered by the use of the lamps or active current loop transmission.) Charging voltage: 11.5 Volts - 14.5 Volts DC. Protection is provided for accidental reversal of the charging connections Charging current starts at 300mA and drops down to 50mA after eight hours Charging time: Eight hours if the batteries are discharged to the point of turning off the scale
Unit of Measure
Specifications
Item Description
N/AScales, Wheel Load PT300-55 5000 lb NTEP With 20 mA PT-I/O Output Interface Intercomp